Service hotline
15013412501
1, indoor installation: LED strip light for indoor decoration, because it does not have to withstand the wind and rain, so the installation is very simple. Light rainbow electronic production of LED light strip, for example, each LED light strip behind the sticker with self-adhesive 3M double-sided tape, installation can be directly torn off the surface of the 3M double-sided tape sticker, and then the strip is fixed in the need to install the place, press the hand flat on the good. As for some places need to corner or long how to do it, it is very simple, LED strip light is a group of 3 LEDs in series and parallel way of circuit structure, each 3 LED that can be cut to use alone.
2, outdoor installation: outdoor installation will be subjected to wind and rain, if the 3M adhesive fixing, time will cause 3M adhesive viscosity reduced and lead to LED strip lights off, so outdoor installation is often used in the way of slot fixing. Need to cut and connect places, the same method and indoor installation, just need to additionally equipped with waterproof glue to consolidate the waterproof effect of the connection point.
3, the power supply connection method: LED light strip general voltage is DC 12V, so you need to use a switching power supply power supply, the size of the power supply according to the power of the LED light strip and connect the length to determine. If you do not want to use a power supply to control each LED strip, you can buy a large power switching power supply to do the total power supply, and then all the LED strip input power supply are connected in parallel (wire size is not enough if you can extend the other), unified by the total switching power supply power supply. The advantage of this is that it can be centrally controlled, the inconvenience is that you can not realize the effect of individual LED strip light and switch control, specifically which way can be used by their own to measure.
4, the controller connection: LED running lights and RGB full-color light belt need to use the controller to achieve the effect of change, and the control distance of each controller is not the same, in general, the control distance of the simple controller for 10 to 15 meters, the control distance of the remote control controller for 15 to 20 meters, the longest can be controlled to a distance of 30 meters. If the connection distance of the LED strip is long, and the controller can not control the long strip, then you need to use a power amplifier to tap.
5, pay attention to the connection distance of the LED strip: in general, the 3528 series of LED strip, the longest connection distance of 20 meters, 5050 series of LED strip, the longest connection distance of 15 meters. If beyond this connection distance, the LED strip is easy to heat, the use of the process will affect the service life of the LED strip. Therefore, the installation must be in accordance with the manufacturer's requirements for installation, do not let the LED strip light overload operation.