Service hotline
15013412501
Scope of application
LED strip light, LED strip light has been widely used in furniture, automobile, advertising, lighting, ship, bar and other industries.
Installation method
①The four-wire light strip is about 22mm wide, 8mm thick and weighs about 0.25kg/m (4 meters a kilogram)
② four-wire strip has four wires, three rows of lights (note that not four rows of lights Oh ~ ~), each row of 1 meter 24 lights, 24 * 3 = 72. Because the power of each lamp bead is 0.05W, 72 beads of the power of the strip is: 72 * 0.05 = 3.6W.
③ each meter has "scissors" mark, only in the mark to cut, cut the wrong or cut bias will lead to a meter does not light! Some will be due to hit the mark when playing off some, it is best to cut before looking carefully at the location of the mark, according to the center is not connected to the place to cut. Look carefully and you will be able to see.
④ Each strip must be equipped with a special plug (plug with transformer); must be connected to the transparent plastic cover removed, connected to the test light and then covered. Do not connect directly with the cover, it is easy to short-circuit.
⑤ When installing the light strip, generally put it in the light slot, straighten it, or use a thin rope or fine wire to fix it. If you need external or vertical mounting, you need to purchase a separate card and tail plug. The original card is transparent, it is better to put waterproof glass glue on the tail plug and plug after installation, so that the waterproof performance is better.